FAQ

Direct purchasing of our products on our website is not possible. We are working together with a world-wide network of wholesalers to get our products distributed.

Check out our Dealer page for a wholesaler or dealer near you:

Dealers

We recommend using 4 point tie-downs to transport your motorcycle. 2 in the front on each side and 2 in the rear on each side. Always lash down at a slight forward angle to your direction of travel. This ensures that the motorcycle remains firmly secured in the front wheel stand during transport.

The TyreFix is suitable for both front and rear tires. Provided there is enough space and no interference with e.g. a front fender.

We have a range of SteadyStands suitable for almost any tire size. For parking we recommend our regular SteadyStand, for transport we recommend our ‘Fixed’ version which are designed to be mounted onto a surface.

SteadyStand®

• Suitable for wheel sizes from 15 to 19 inches, tyre width from 90 to 130 mm

SteadyStand® Fixed

• Suitable for wheel sizes from 10 to 19 inches, tyre width from 90 to 130 mm

SteadyStand® Scooter
SteadyStand® Fixed Scooter

• Adjustable for wheel sizes from 10 to 13 inches and tyre width from 80 to 120 mm

SteadyStand® Multi
SteadyStand® Multi Fixed

• Suitable for wheel sizes from 15 to 21 inches, tyres with width from 90 to 200 mm.

SteadyStand® Cross
SteadyStand® Cross Basic

• Suitable for wheel sizes from 18 to 21 inches and tyre sizes from 90 up to 120 mm

Visit all our SteadyStand products:
Motorcycle Stand

To use our SteadyStands on your rear wheel, we recommend our SteadyStand Multi, which is more suitable for wider tyres. The SteadyStand Multi is suitable for tyres from 15 to 21 inches and 90 to 200 mm wide.

SteadyStand® Multi
SteadyStand® Multi Fixed

Before purchasing a U-Turn Motor Mover, investigate if your motorcycle meets all the requirements and if your space of operation is suitable.

U-Turn Motor Mover

• For motorcycles with a wheelbase from 130 to 152,5 cm
• For motorcycles with a maximum weight of 275 kg
• For motorcycles with a maximum length of 210 cm
• For motorcycle with a max tire width of 200 mm

U-Turn Motor Mover XL

• For motorcycles with a wheelbase from 125,5 to 180 cm
• For motorcycles with a maximum weight of 450 kg
• For motorcycles with a maximum length of 250 cm
• For motorcycle with a max tire width of 200 mm

The U-Turn Motor Mover is designed for maneuvering only. Do not store the motorcycle on the U-Turn Motor Mover in the lifted position for long periods of time. Release the lever after maneuvering to lower te motorcycle onto the floor. For first time adjustment and operation two people are recommended. A smooth surface for maneuvering the U-Turn Motor Mover is recommended, uneven tiles or floors might damage the wheels.

Our U-Turn Motor Mover is

• Suitable for motorcycles with a wheelbase of 130 to 152,5 cm up to 275 kg
• Suitable for motorcycles with a maximum length of 210 cm
• For motorcycle with a max tire width of 200 mm

Our U-Turn Motor Mover XL is

• Suitable for motorcycles with wheelbase from 125,5 to 180 cm up to 450 kg
• Suitable for motorcycles with maximum length of 250 cm
• For motorcycle with a max tire width of 200 mm

The maximum length and wheel dimensions are based on the limits of the operational design, e.g. if the motorcycle is too long, the lift handle will interfere with the rear fender or tire.

We recommend a smooth, even surface for our Motor Movers to allow for easy manoeuvring and to prevent damage to the wheels.

We do not recommend that you leave your bike on the U-Turn Motor Mover for long periods of time (e.g. during the winter). You can leave the U-Turn Motor Mover in place, but use the handle to release the pressure and ensure that the bike rests on its own.